The detonators having a HNS base charge offer a temperature rating of 190°C / 375°F for a maximum duration of an hour. the temperature rating increases to 260°C / 500°F for an hour when used with the heat insulated special vacuum flask.

Unmatched protection of people and operations from an intrinsically safe temperature resistant detonator that will not initiate without a series of digitally coded signals.

Our fluid disabled detonators ensure desensitization after just two minutes of submersion in water avoiding the explosive device to detonate.

Plug and Go arming procedures in line with API RP-67 electrical before ballistic arming recommendations.

DynaEnergetics offers all the necessary hardware and accessories to ensure the compatibility of the Top Fire Detonators with its gun systems and explosive tools.

No external or internal wiring, eliminating on-site wiring, ballistic connections and/or crimping.

Pressure rating of up to 700 bar / 10000 psi for a maximum duration of an hour.

Temperature rating of up to 190°C / 375°F for a maximum duration of an hour.

The IS2 is immune to stray voltage, stray current and RF interference, which enables simultaneous wellsite operations during perforating.

Consistent time between initiations eliminates the need for wireline speed adjustments and allows for closer stage spacing

Faster initiation speeds and more efficient performance simplify operations and offer superior value. Increase operational efficiency and accomplish more in less time.

Wire-free Plug and Go™ design, and Intrinsically Safe™ immunity to stray voltage, stray current, and RF interference, enable trouble-free simultaneous wellsite operations during perforating and virtually eliminate misruns and failures

The IS2 is immune to stray voltage, stray current and RF interference, which enables simultaneous wellsite operations during perforating.

Integrated addressable switch, detonator and solid state microelectronics.

Electrical wiring connections are reduced from 5 to 3, increasing wiring efficiency and decreasing the chance of human error by 40%.

Intrinsically Safe plug-and-go, fully digital and does not require a separate switch.

Enables continual real-time communication with surface and provides confirmation of initiation.

Temperature-resistant igniter that can be used in virtually any industry standard setting tool firing head.

The highly intuitive interface allows single shot or select-fire operations along with fast switch testing and instant initiation when you need it.

The operating system is available in multiple languages with the option to run as a standalone accessory or combined with a PC in software mode.

The Infinity Firing Panel has a dual wireline drum output, which enables the operator to switch from one drum to another without having to re-connect the panel.

Confirms all wiring and grounding, ensuring optimal downhole performance.

Safely check the entire gun string on surface and detect any possible fault early enough to prevent lost time.

Automatically checks the number of attached detonators or switches verifying correct wiring and grounding.

Automatically detects the attached electronic detonator or electronic igniter wiring for correct polarity.

Designed to optimize field operations, the single shot panel is portable, battery powered and compatible with shooting GR correlation tools.

Full verification of wiring and grounding plus a firing circuit check of the electronic detonator or igniter can be performed using minimal current (<1mA) for safety.